UHV Connector - 9D - Female
9 Socket Female, PEEK D-Connector.
(Contacts are not included and must be purchased separately)
This is a test of the "site alert message system". (edited)
9 Socket Female, PEEK D-Connector.
(Contacts are not included and must be purchased separately)
9 Pin Male, PEEK D-Connector.
(Contacts are not included and must be purchased separately)
PEEK strain relief for 9D Type Male or Female PEEK Connector.
15 Socket (Female), PEEK D-Connector.
(Contacts are not included and must be purchased separately)
15 Pin (Male), PEEK D-Connector.
(Contacts are not included and must be purchased separately)
PEEK strain relief for 15D Type Male or Female PEEK Connector.
25 Socket (Female), PEEK D-Connector.
(Contacts are not included and must be purchased separately)
25 Pin (Male), PEEK D-Connector.
(Contacts are not included and must be purchased separately)
PEEK strain relief for 25D Type Male or Female PEEK Connector.
50 Socket (Female), PEEK D-Connector.
(Contacts are not included and must be purchased separately)
50 Pin (Male), PEEK D-Connector.
(Contacts are not included and must be purchased separately)
PEEK strain relief for 50D Type Male or Female PEEK Connector.
Stainless steel strain relief for 9D Type Male or Female Macor ceramic connectors.
Stainless steel strain relief for 15D Type Male or Female Macor ceramic connectors.
Stainless steel strain relief for 25D Type Male or Female Macor ceramic connectors.
Stainless steel strain relief for 50D Type Male or Female Macor ceramic connectors.
25 pin (male), PEEK sub-D panel mount connector with mounting ears.
(Pins sold separately and are in picture as an example only)
9 Socket (Female/Female), PEEK Gender Adapter.
15 Socket (Female/Female), PEEK Gender Adapter.
25 Socket (Female/Female), PEEK Gender Adapter.
50 Socket (Female/Female), PEEK Gender Adapter.
110908 — 20-24 AWG wire diameter, female contacts with stainless steel sleeve
110909 — 26-30 AWG wire diameter, female contacts with stainless steel sleeve (see 'option' on detail page)
10 per package — High duty connect/disconnect cycles (3+ cycles per day)
0.12-0.40mm, 26-36AWG wire stripper. Great for use with KAPTON insulated wire.
0.25-0.80mm, 20-30 AWG Wire Stripper. Great for use with KAPTON insulated wire.
This screwdriver set is ideally suited for all your connector needs.
UHV Vacuum Connectors in this section are sold as the most basic components. The female cable connectors mate directly onto the vacuum-side of subminiature-D UHV feedthroughs, HV feedthroughs, HV Bulkhead-D feedthroughs, or with subminiature-D UHV ribbon cables.
UHV Vacuum Connectors and Strain Reliefs are made from either PEEK (polyetheretherketone) or Macor Ceramic and do not include contacts. Contacts must be purchased separately.
UHV Vacuum Strain Reliefs are made from either PEEK (polyetheretherketone) or Stainless Steel.
Standard Contacts are made of a copper alloy and gold plated. The contacts listed below are intended for use with ultrahigh vacuum PEEK connectors listed on this page.
Gender Adapters are offered for use with Accu-Glass Products subminiature-D feedthroughs with male pins on both sides, to correct pin numbering to the standard subminiature-D configuration. (Pin 1 reverses position from vacuum side to air side due to the male to male configuration.) Ultrahigh vacuum gender adapters are made of UHV compatible PEEK material. Contacts ARE included with the gender adapters.
Panel Mount PEEK connectors are wider than our standard PEEK connectors and are designed with a 4-40 mounting hole on each end (ears) to facilitate easy mounting into panels and bulkheads.