Home › Coaxial › Subminiature Coax-D › Air Cables

This is a test of the "site alert message system". (edited)

Coax-D Air Cable Assemblies

Sub D-Connector to Cable / BNC - 1-Coax, 4-Instrumentation - Female

Sub D-Connector to Cable / BNC - 1-Coax, 4-Instrumentation - Female

Part Number: 100560

1 Coaxial (RG174/U) + 4 Way Air Side Cable (24AWG) with Air side D-Type (female) connector on one end, BNC (male) coaxial connector and non-terminated instrumentation cable on the other. Instrumentation cables is 96" long and the coax cable is 6" long.

$136.00
Sub D-Connector to Cable/SMA - 1-Coax, 4-Instrumentation - Female

Sub D-Connector to Cable/SMA - 1-Coax, 4-Instrumentation - Female

Part Number: 100561

1 Coaxial + 4 Way Air Side Cable with Air side D-Type (female) connector on one end, SMA (male) coaxial connector and non-terminated instrumentation cable on the other. Instrumentation cables is 96" long and the coax cable is 6" long.

$148.00
placeholder image

Coax-D Air Cables

D-Connector to Cable Coax-D air cable assemblies are pre wired with 96-inch long RG174/U coaxial cables and are non-terminated at one end.  The single coax connector to cable assembly also includes 96-inch long, four-conductor data cable with 0.18 diameter PVC cable jacket and aluminum-mylar foil shielding with a 24 AWG tinned-copper drain wire.  The four individual conductors are PVC insulated 24 AWG, 7 x 0.008 stranded, tinned copper wires.

D-Connector to BNC or SMA Connector assemblies are rewired with 6-inch long RG174/U coaxial cables and terminated with male BNC or male SMA connectors.  The single coax connector to BNC or SMA connector assembly also includes a 96-inch long, four-conductor data cable (same as above).