PEEK Cable / Zip Ties - 3.9" Long
Part Number: 111156
PEEK cable ties, 0.87" max bundle diameter, 3.9" long, 0.098" wide.10 per package.
$52.00
This is a test of the "site alert message system". (edited)
PEEK and Stainless Steel Cable Ties
Stainless Steel Cable / Zip Ties
Part Number: 111150
Stainless Steel cable ties, 1" to 2.7" max bundle diameter. 5",7.9", and 10.2" lengths available here, 0.18" wide.
10 per package.
$49.00
Stainless Steel Cable Mount - Two Way
Part Number: 111151
Stainless Steel cable 2 way mount, 304 SS, 0.17" mounting hole. Great for use with PEEK and SS cable ties listed above.
5 per package.
$65.00
Stainless Steel Cable Mount - Folded
Part Number: 111152
Stainless Steel cable 1 way folded mount, 304 SS, 0.28" mounting hole. Great for use with PEEK and SS cable ties listed above.
5 per package.
$31.00
PEEK Mount - (Polyether ether ketone)
Part Number: 111158
PEEK cable mount, #8 or M4 screw mounting hole. Great for use with PEEK cable ties listed above.
5 per package.
$39.00
PEEK Spacer - (Polyether ether ketone)
Part Number: 111159
PEEK cable tie spacer, 0.57 L x 0.32 W x 0.32 H, should be used with cable ties PN-111155, 111156, and 111157 at intervals of not greater than 8 inches to maintain proper separation between wires.
5/pkg.
$47.00
PEEK Cable / Zip Tie - Installation Tool
Part Number: 111154
PEEK cable tie tool. Automatically tensions and cuts off tie when pre-determined tension is reached. Used for PN - 111155.
$402.00
Stainless Steel Cable / Zip Tie - Installation Tool
Part Number: 111153
Stainless Steel cable tie tool. Automatically tensions and cuts off tie when predetermined tension is reached. Used for PN - 111150.
$1,149.00
PEEK Zip Ties
PEEK (polyetheretherketone) Cable/Equipment Ties are ideal for ultrahigh vacuum, high temperature, and harsh chemical environments. PEEK cable ties are rated to 250°C and 1 x 10-10 Torr. The uses for these PEEK zip ties are virtually unlimited.
Stainless Steel Cable Ties
Our stainless steel zip ties are also ideally suited for ultrahigh vacuum, high temperature, and harsh chemical environments. SS ties are rated to 538°C and 1 x 10-11 Torr. Stainless steel cable ties have a much greater loop tensile strength than PEEK and are constructed with fully rounded edges and smooth surfaces to protect cables and/or equipment.
Stainless Steel and PEEK Mounts
Mounts allow stainless steel and PEEK ties to be inserted from either of two sides, providing a low profile attachment for minimum space requirements. Mount using Vented Screws or using Torr Seal.
The Accu-Glass Products' line of ergonomic Cable Tie Installation Tools has a lightweight design to speed installation and reduce repetitive stress injuries. These installation tools provide a flush tie cut off, "eliminating sharp edges that could cut into adjacent wire bundles."