Home › Flanges / Hardware › CF Flanges / Hardware › Mounting Hardware
Beta Testing Site

This is a test instance of the site. Please go to https://www.accuglassproducts.com/ for the production site. 

Mounting Hardware for Conflat (CF) Flanges

Mounting Hardware Conflat Cf Flanges - Ultrahigh (UHV) In-Vacuum, drawing

Conflat Hardware and Fastener Kits

Ultrahigh (UHV) In-Vacuum Mounting Hardware consists of sets of Nuts, Bolts, and washers for a given size of Conflat CF flange. These are made with low magnetic permeability, 18-8 stainless steel.

It is strongly recommended that all bolt, nut, and washer combinations are lubricated, either by one component being silver-plated or the application of a suitable thread lubricant.

This Conflat Hardware is good to use on Conflat CF Flanges that are rated to 450ºC and 1x10-10 Torr.

Hex Head Bolts
Hex-head bolts are long enough to penetrate two through-holed flanges and leaves plenty of space for washers and nuts. For blind-tapped flanges or tapped flanges and shorter length bolt is needed.

Please see individual products for specifications.
12-Point Cap Screws – Please call for your requirement.