Kapton® Heater Film - 1" x 1" - 28 VAC
Part Number: 112230
1" x 1" Inch size. Kapton® heat film, 28 VAC, 10 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
$96.00
This is a test of the "site alert message system". (edited)
Kapton Heating Elements
Kapton® Heater Film - 2" x 2"- 28 VAC
Part Number: 112231
2" x 2" Inch size. Kapton® heat film, 28 VAC, 40 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
$107.00
Kapton® Heater Film - 1" x 3" - 28 VAC
Part Number: 112232
1" x 3" Inch size. Kapton® heat film, 28 VAC, 30 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
$132.00
Kapton® Heater Film - 2" x 2" - 115 VAC
Part Number: 112233
2" x 2" Inch size. Kapton® heat film, 115 VAC, 40 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
$111.00
Kapton® Heater Film - 1" x 3" - 115 VAC
Part Number: 112234
1" x 3" Inch size. Kapton® heat film, 115 VAC, 30 Watts, rated for 1x10-8 torr.
Available with or without acrylic adhesive backing.
$146.00
Kapton Heaters and Film/Sheet Elements
Kapton heaters in film or sheet provide a means to heat sample trays, cuvettes, reagent bottles, etc. inside a (HV) high vacuum chamber.
Constructed with two sheets of Kapton® film that is resistant to chemicals, oils, and radiation and have a total thickness of only 0.008”.
Maximum heat output is 150ºC.
FEP adhesive used internally.
Lead wires are Teflon insulated with a length of 1 foot.
Kapton heating elements are 10 watts/sq. in. for rapid warm-up.
Vacuum rated to 1x10-8 Torr and 200ºC maximum exposure temperature.
Available with or without Acrylic adhesive.
