Home › Fluid Feedthroughs

This is a test of the "site alert message system". (edited)

Swagelok & VCR Fluid Feedthroughs

One dual Swagelok and one dual VCR vacuum fluid feedthrough Show General Service Fluid FT for One dual Swagelok and one dual VCR vacuum fluid feedthrough
General Service Fluid FT
One dual Swagelok and one dual VCR cryogenic vacuum fluid feedthrough Show Cryogenic Service Fluid FT for One dual Swagelok and one dual VCR cryogenic vacuum fluid feedthrough
Cryogenic Service Fluid FT
Ultrahigh High In-Vacuum UHV HV, Gas, Liquid, Fluid Feedthroughs, drawing

Gas, Liquid, Fluid Vacuum Feedthroughs

General service fluid feedthroughs are used to deliver gases and/or cooling liquids into high and ultrahigh vacuum systems.  Our vacuum fluid feedthroughs are available in single or dual tube configurations, with 1/8 or 1/4 inch tube diameters.  Feedthrough tubes are terminated with Swagelok standard compression (swaging) fittings, or metal-gasket-fitted, ultrahigh-vacuum-rated VCR® fittings.

Swagelok® fittings are demountable, gas-tight cold-formed (swaged) mechanical joint between a tube's OD and the ferrules housed inside each fitting.  Tube finish, temper and wall thickness are all critical parameters for making reliable, gas and vacuum-tight seals.

VCR® fittings are zero-clearance, demountable UHV compatible mechanical joints produced by crushing a deformable metal gasket between two mating and polished fitting gland faces. Fitting gland finish, and metal gasket temper are critical parameters for making reliable, gas and ultrahigh vacuum seals.

These are general purpose, non-cryogenic, tube feedthroughs used for gas and/or fluid coolant delivery into high and ultrahigh vacuum systems.

Fluid Feedthrough Material Specifications
Material  
  • CF Flange / Tubes
  • VCR Fittings


304 Stainless Steel
316 Stainless Steel
Fluid Feedthrough Vacuum Range Specifications
Vacuum Range  
  • UHV, Ultrahigh vacuum
  • HV, High vacuum
1x10-13 Torr
1x10-8 Torr
Fluid Feedthrough Temperature Range Specifications
Temperature Range  
  • CF Flange Mount
  • ISO KF Flange Mount
  • VCR, Fitting
  • VCR SS, 316L Gasket
  • VCR Cu, Copper Gasket
  • VCR Ni, Nickel Gasket


450ºC
150ºC
450ºC
450ºC
204ºC
315ºC
* Overall assembly ratings must be adjusted to that of the lowest rated component.  

CLICK ON A CATEGORY BELOW TO SEE OUR AVAILABLE PRODUCTS FOR PURCHASE.